Torque Converter Go Kart Clutch, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, Small Engine Belt Drive, 3/4″ 218353A, (0.75″ 10T 40/41)

.75″ torque converter replaces Comet TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts

3/4″ go kart clutch is an asymetrical inline small engine clutch that replaces Comet TAV2 30 – 75 Torq A Verters. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdirve. A torque converter acts similar to a transmission, allowing higher speeds of your small engine, and smoother acceleration.Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches.

This torque converter fits a 0.75″ shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2 HP – 7 HP

Model 1: 1″ Bore, 35 Chain, 12 Tooth
Model 2: 1″ Bore, 40/41 Chain, 10 Tooth

Engine compatability: Torque Converter is compatible on most engine with horizontal shaft.

Briggs
Robin
Tecumseh
Honda (and clones)
Kohler
Clinton
Lifan
Specifications:

Large Pulley Driven unit: Dia. 157mm or 6″
Driver clutch bore: 3/4″
Belt: Asymmetrical type
Top width: 19mm(3/4″)
Sprocket teeth: 10 tooth for #40/41 chain
Engagement range: 2350??200 RPM
Recommended engine: 2HP – 7HP engines, 3/4″shaft with flat key
The Torque Converter assembly includes:

Driver Unit:1set
Driven Unit:1set
V-Belt:1pc
Driven Shaft & Gear:1set
Side Retainer Plate:1pc
Torque Converter Cover:1pc
Instructions
All respective trademarks and registered trademarks appearing on this description belong to their respective owners
Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors. THIS KIT INCLUDES COARSE THREAD SCREWS.
Driver clutch bore: 3/4″(19mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions.

Spread the love
(Last Updated On: March 18, 2021)

.75″ torque converter replaces Comet TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts

3/4″ go kart clutch is an asymetrical inline small engine clutch that replaces Comet TAV2 30 – 75 Torq A Verters. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdirve. A torque converter acts similar to a transmission, allowing higher speeds of your small engine, and smoother acceleration.Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches.

This torque converter fits a 0.75″ shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2 HP – 7 HP

Model 1: 1″ Bore, 35 Chain, 12 Tooth
Model 2: 1″ Bore, 40/41 Chain, 10 Tooth

Engine compatability: Torque Converter is compatible on most engine with horizontal shaft.

Briggs
Robin
Tecumseh
Honda (and clones)
Kohler
Clinton
Lifan
Specifications:

Large Pulley Driven unit: Dia. 157mm or 6″
Driver clutch bore: 3/4″
Belt: Asymmetrical type
Top width: 19mm(3/4″)
Sprocket teeth: 10 tooth for #40/41 chain
Engagement range: 2350??200 RPM
Recommended engine: 2HP – 7HP engines, 3/4″shaft with flat key
The Torque Converter assembly includes:

Driver Unit:1set
Driven Unit:1set
V-Belt:1pc
Driven Shaft & Gear:1set
Side Retainer Plate:1pc
Torque Converter Cover:1pc
Instructions
All respective trademarks and registered trademarks appearing on this description belong to their respective owners
Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors. THIS KIT INCLUDES COARSE THREAD SCREWS.
Driver clutch bore: 3/4″(19mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions.

Contact Us

Reviews

There are no reviews yet.

Be the first to review “Torque Converter Go Kart Clutch, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, Small Engine Belt Drive, 3/4″ 218353A, (0.75″ 10T 40/41)”

Your email address will not be published. Required fields are marked *